Fourteen - fifteen !

  • 1. A view of a cut off rim from the outer side.

  • 2. An inner view of the same rim.

  • 3. A view of the 14" rim in the 15" wheel prior to welding.

  • 4. Reverse side of the wooden jig I made to hold the rim in place for welding. Note the "L" brackets for securely holding the rim.

  • 5. Front side of wooden jig. Notches were cut to allow for tack welding before removing jig.

  • 6. Jig and 14" rim in position in 15" wheel. Four "C" clamps were used to maintain position while tack welding.

    Please click HERE for pictures of the finished product !