MOPAR PARTS LIST EARLY 50's TO MID 60's Revised, January 31, 2005

Hello fellow 300 members and Mopar collectors. Follows is a parts list that will fit most 300's and many other Mopar makes and models. I am a jobber for the following NEW and some NOS parts. If total comes to $100 or more I will pay shipping in the lower 48. Heavy items shipping applies. Shipping credit for over seas shipping. $200 or more total order, less 5% discount.

1) Brake light switch, $8.50
2) Vacuum safety switch on manifold, $9.50
3) Water temp sender $13. Chrysler. 57-59; 60-63. Fit other models and years. Check with me.
4) Radiator hoses, upper $13.50, lower $15, bypass hose, $7, (hemi).
5) Water pump shaft, bearing and seal kit w/ gasket, 50's to 60's. $35. Rebuilding service available. See #17.
6) Water pump gasket only, $5. Most makes and models.
7) Points $7.50 ea; condenser $6.50; rotor $6.50; cap w/ brass lugs $17.50
8) Radio condensers w/ red caution tags $7.50 ea (3 req.)
9) Generator brushes $8.50, starter, 57 up $10; 56, $25. I have to modify from 57's. Lots of labor.
10) AFB carb kits $31 ea. WCFB carb kit, $29. Air horn gasket only, $4
11) Front wheel grease caps, 55-72, (import) $7.50 ea. Domestic NOS, $15 ea. Grease cap installation tool. Protect the cap. $6
12) Steering box rebuild kit, (58 up cast iron box). Includes all shaft seals, internal lip seals & o-rings.
Bearings extra. $43. Rebuild service available on a time available basis.
13) Power steering canister flat seal ring 55/56 $8; 57 up PS canister seal $6; 55/56 power steering pump filter $19.
14) Gas tank filler neck seal, $3 ea. Tank sending unit seal, $3 ea. 57/58 Thompson power steering cap seal. $3 ea.
15) Upper and lower control bushings, upper $49 set 4 , (out of stock 57/58 C76, LY3) lower (2) $37 set. most years.
16) Ball joints, upper $42 ea, lower $54 ea. Most years
17) Rebuilt water pump $85 your core, plus kit, (see #5). Extra charge if your pump has plastic impeller. Must replace w/ steel.
For pumps integral to housing like 55/56 add $25 for media blasting and handling large housing.
18) Exhaust manifold anti rattle heat riser spring, $3.50 ea. Many years.
19) Round and oval air filters, $13 ea.
(19a) Original style water decals for 57/58 300, NY, IMP. air cleaner and D, DS, P models, $8 ea.
20) A/C conversion kit from early shaft seal, (57 to 61) to late seal. $79. In future you would only need modified late seal at $30 ea. kit includes late seal.
21) 57/58 300 Hub cap mask set of 4, $60. Can send photos how it is installed and end results. Complete instructions included.
You won't believe how nice your cap painting will look.
22) Rear spring shackle bushings, (8 pcs) $29 set
23) Rear spring eye bolts. Holds the spring together in center. pair $10
24) Rear leaf spring, heavy duty woven cotton, anti squeak leaf separators. Duplicate of original. Material to replace 2 springs, all leaf tips. $20
25) Center link dust shields, $6 pair.
26) Starter solenoid, on starter, (56 to 59 with MDT starter, $54. 59 to late 60's with 1889 200 starter $43.
27) Carter NOS ceramic fuel filter elements with gasket, $16ea. Gasket only $3.ea. New zinc plated springs for elements, $4 ea.

Free shipping orders over $100 in the lower 48 states. Take 5% discount orders $200 or more.

28) Replacement fuel line between carbs 55 to 57 300, fitting ends same as original. Hose for all gas mixtures,
Nylon reinforced, 50 psi test, $18. Specify year. Fuel line 5/16" for tank and to pump from steel line, 18" for both, $4. Same high quality as line at carb's.
29) Brass fitting 90 deg out of rear Carter fuel filter to hose end, $4. Brass "T" fitting out of front Carter fuel filter, $6.
30) Generator roller bearings, (sealed for life). $7.50 ea. Never oil bearing again. '55 to '59 2 req. '60 up 1 required at front.
Rear is bushing that I custom machine slot so wick can lube generator shaft. New bushing and 2" felt wick, $15.
31) Brake booster rebuild kit, (bellows type, 57 to 61?). Includes all lip seals, o-rings, filter and reference guide. $38. Does not include bellows. Rebuild service available.
See #35 for Parts doc Rubber rejuvenator that will condition bellows to a supple condition.
32) Torque converters "rebuilt" 55 to 61. Completely disassembled, hot tanked, new ring gear (if req.), (crank studs if req.), internal thrust washers,
welded, balanced and pressure tested. Do not run an old T.C. on a rebuilt trans. I can send a photo of the sludge inside an old converter
and metal particles that will end up in your new trans. $320 exchange. Shipping will apply.
32a) Replacement starter ring gear for torque converters, 55 to 61, $45ea.
33) 57 Chrys. tail lenses, NORS. 300C, NY, Saratoga, Windsor. $75 pair.
34) 57 Chrys. original used backup lenses. No cracks or sun checks. Need dressed and polished to look new. Cost varies based on condition. Photos.
35) Parts Doc brand Rubber Rejuvenator. 16 oz. concentrate, $20. A must for every restoration project. The highest quality moisturizers with no drying agents.
Will return old stiff rubber parts to a supple condition, use full strength or up to 2:1 for rejuvenating. Soften rubber brake bellows, front trunion joint boot, all glass seals,
wing window seals, fire wall grommets, ball joint and tie rod dust boots, etc. Use to topical treat tires, rubber seals, vinyl, plastic and leather.
Use 4:1 to 8:1 as a topical treatment.
36) Cast iron Torqueflite pan gasket. $9 ea. Powerflite $13 ea. Rubber impregnated gasket is the best you can buy. Not cork.
37) Cast iron Torqueflite deluxe rebuild kit, $280. Powerflite deluxe kits, $195.
Standard kits, (no clutch plates or friction discs). Includes, paper gaskets, rubber and steel seal rings + front and rear seals. TF $135, PF $125.
Pump drive sleeves $37; 56 to 60 tail shaft bearings, $19; Thrust washers & bushings ($8 to $15);
Front high temp. silicone seal $22; Rear seal, Buna-n $12; Spring and roller kits, $24; Bands, front and rear $45 ea. exchange.
Clutches and plates separate, $14ea.; External small diam. kick down lever seals, TF & PF, $4; PF shift lever steel cased seal, $12; Cast iron
NOS reaction shaft, $75; Front clutch hub press in replacement collar, $30; TF & PF Speedometer pinions, good used.
Various gear count. Check w/ me. $50. Many good used hard parts.
38) Cast iron Torqueflite conversion kit from standard to 300 HD. Requires custom machining and modification of clutch piston to
allow for 5th clutch and disc, piston return spring, governor weight and spring and kick down lever. Requires core parts
exchange. $155. 5th steel plate and friction disc $28 set, required for HD trans.
NOTE: Most 300's have had the transmission exchanged out long ago with a standard. I can send photo of side by side comparison.
39) 59 300 & all Chryslers, tail light chrome left & right housing set. No pitting or damage. Very respectable drivers. Easy re-chrome for show. $200 set.
40) NOS 57 to 59 door and ignition cylinder lock set keyed alike. Includes pair of original aluminum Lion Crest keys with tag no.$115 set.
41) NOS 57 to 59 trunk and glove box set keyed alike. Includes original oval head aluminum key set. $120.
42) NOS 57 to 59 glove box locks. Includes a set of original aluminum oval keys. You can have trunk lock re-keyed to new keys. $30
43) Brake shoes relined, (core exchange) with original asbestos lining. I sell for a one man shop that has been relining for 40+
years and still has original lining stock. Shoe is completely stripped to bare metal, lining bonded, dipped in the original brown varnish then arched to your drum size. Need dimension your drums are turned to. $165, 8 shoes. $85, 4 shoes. Shipping applies.
44) Upper control arm bumpers, 57 up, many years. $19 pair. Steel Rubber Parts gets $32.
45) Strut rod bushings, 57 to 64, $19 pair.
46) Neutral safety starter switch on transmission, $19.
47) Speedometer pinions, TF & PF, 17,18 &19 tooth, used excellent condition. May have others. $50ea.
48) Concourse restored 57 to 61 twin strut mirrors. completely disassembled, repairs made, stripped and re-plated, new mirror,
SS mounting screws, $350 ea. Core exchange or core charge.
49) 57/58 392 hemi 300, NY, Imp. fan belt sets. A/C, set 4 $28. Non A/C, set 3 $16. Non cogged, (no notches) same as original. Others available.
50) Fuel filter, end of pickup tube in fuel tank. For 5/16" and 3/8" tubes. $6 ea.
51) Original style stamped, carb to air cleaner wing nuts, cadmium plated. $3 ea.
52) Mint set of 57 300, D500, Fury air cleaners in primer. $850 set. Includes a pair of air filters and orig. water decals.
53) Rebuild 61 to 68 floating style PS pump bracket. If yours is worn at the pivot bolt holes and wobbles, then you need this
rebuild that includes boring out the original holes, custom machine 4 step bushings that are welded in, includes new bolt with
lock nut, $75. Glass beaded ready to paint. Photos on club site.Click here for more.

*Prices on this list supersede prices in photos.
*Photos available for all parts.
*All prices subject change based on my cost at time of sale.
*All prices in US dollars.
*All parts are new unless specified otherwise.
*Some items subject to prior sale. *May not have for all years.
*If you do not see what you need contact me.
*Satisfaction guaranteed or return unused for full refund less shipping. Contact me before any return.
*Shipping costs apply under $100 or if heavy item. I combine order for actual ship cost.
*I ship UPS ground unless requested otherwise. Not responsible for lost shipments. I will help to track any lost or delayed item.
Any final settlement of lost goods will be through Shipper.
*UPS insurance is included up to $100, $.35 ea. $100 thereafter. Buyer is responsible to ask for additional insurance over $100.
*Buyer is advised to insure items sent to me. I am not responsible for items that I do not receive. UPS is recommended as ship
rate includes the first $100 value insurance plus a tracking number.
*Not responsible for consequential damages related to parts I sell.
*Not responsible for labor to install and remove a defective part. A small risk you must take.
*Full refund on any part proven to be defective, including shipping. Excludes electrical parts. I test before shipping.
*Accept personal checks, money orders, PayPal plus a 3 1/2% service fee.

Ship cores and checks to:

Gary Nelson
9550 Gateway Dr.
Reno, Nevada 89521 USA
Phone: 775 853-5335 m-t days
E-mail: garythepartsdoc@glnelson.com
Revised, January 31, 2005