Niels Hansen's 1961 300G
Restoration in Germany
Page 5
March 2012
Note the Disc Brake conversion kit from AAJ Brakes. The brake kits are good quality but
you have to take a little material
away either from
the conversion kit
ground plate or from the axle construction. We took material from the original
parts
because the ground plate is not very thick.
You can see the tight fit between the master cylinder and the booster.
With such limited access to the rear reservoir, we drilled a hole
into the inner wall of the fluid container.
Now I will be able to fill up both compartments from the front.
To page 6
Back