Does your old power steering pump wobble more than Elvis?
	Maybe what you need is a rebuilt bracket from Jamie Hyde.
	Here is a view of the rebuilt assembly from below. Note the bushings to support the brackets on the pivot bolt.
	This is the top half of the bracket assembly. One of the two bushings is shown.
	A close up view of one of the bushings.

From 1960 through 1968, Chrysler used a power steering mount that allowed the pump to float. It is common to see these mounting brackets wobble on cars with high miles. You can have your power steering brackets rebuilt by Jamie to a better-than-new condition. The bracket holes are drilled and new bushings and a new pivot bolt are installed. These provide a larger bearing surface and these rebuilt brackets will last longer than the original design.

Contact Jamie Hyde for more information